Semi-automatic wrapper with extendable film to stabilize palletized loads. The model shown in the illustration also allows you to introduce pallets with manual transpalets. It can work with or without the operator present during the duty cycle.
- The structure of the machine is made of painted sheet steel
- Column with hinged base for quick and easy installation
- Transmission car carrier by belt
- Mechanical safety device (parachute) in case the belt breaks
- Open table for pallet truck entry at 90o, 180o or 270o
- Pneumatic flooring connection
- Electric board
- Mechanical friction. Allows to have constant the tension of the film when the coil is changed.
- Drive to get progressive start-up with fixed stop in position
- Packing program: ascent/drop by selector
- Digital regulation separated from the number of upper and lower revolutions
- Regulation of platform rotation speed with potentiometer
- Speed regulation wind car with potentiometer
- Photocell to read pallet height
- Safety photocell for transpalet input
- Man/Aut mode selector
Sheet
| Power | 400 V / 50 Hz + N |
|---|---|
| Temperature of use | +5oC to +35oC |
| Platform rotation speed | 10 r.p.m. |
| Platform diameter | 1500 mm |
| Total dimensions (on floor) | 2715 x 1535 x H 2600 mm |
| Pallet measures to be packed | 1000 x 1200 x 2250 mm |
| Weight | 370 kg |
| Platform capacity | 1500 kg |
| Installed power | 1.0 kW |
| Height of the film coil to use | 500 mm |
| Electrical protection | IP 54 |
| Film coil diameter | 300 mm |
